* Wrench set
* Socket set
* Pliers
* Sealant
* New water pump
Instructions:
1. Drain the coolant from the radiator and engine block.
2. Remove the serpentine belt.
3. Remove the water pump pulley.
4. Remove the bolts holding the water pump to the engine.
5. Remove the old water pump.
6. Clean the water pump mounting surfaces.
7. Apply a thin bead of sealant to the water pump gasket.
8. Install the new water pump.
9. Install the new gasket on both sides.
10. Install the water pump pulley and bolts.
11. Refill the coolant system.
