• A flathead screwdriver or pry tool
• A new wiper blade
Instructions:
1. Open the rear liftgate of your Toyota Highlander Limited.
2. Locate the release tab on the wiper arm. It is usually a small black or gray button or lever.
3. Press the release tab and lift the wiper arm up until it is perpendicular to the glass.
4. Use the flathead screwdriver or pry tool to pry up the old wiper blade from the wiper arm.
5. Discard the old wiper blade.
6. Position the new wiper blade on the wiper arm.
7. Press down on the wiper blade until it snaps into place.
8. Lower the wiper arm back to its original position.
9. Close the rear liftgate.
Your new rear wiper blade is now installed. Test it by turning on the rear window wiper.
