* A flat head screwdriver
* A pair of needle nose pliers
* A can of spray adhesive
* A piece of fabric that matches the headliner
Instructions:
1. Remove the headliner from your Honda. To do this, you will need to remove the visors, dome light, and any other trim pieces that are attached to the headliner.
2. Once the headliner is removed, lay it flat on a table.
3. Use the flat head screwdriver to pry up the edges of the loose fabric. Be careful not to damage the fabric.
4. Once the edges of the fabric are pried up, use the needle nose pliers to pull the fabric away from the headliner.
5. Spray the back of the fabric with the spray adhesive.
6. Center the fabric on the headliner and press it down firmly.
7. Repeat steps 4-6 for any other loose fabric on the headliner.
8. Allow the adhesive to dry completely before reinstalling the headliner.
