1996 Honda Accord LX- AutoZone find the sensor for check engine light code Does anyone know where it is?

The oxygen sensor (O2 sensor) is located in the exhaust system, usually screwed into the exhaust manifold or catalytic converter. It monitors the amount of oxygen in the exhaust gases and sends a signal to the engine computer (ECU) to adjust the fuel mixture accordingly.

To find the O2 sensor in your 1996 Honda Accord LX, follow these steps:

1. Locate the exhaust manifold. It is located on the side of the engine block and is usually made of cast iron.

2. Look for a small, cylindrical sensor screwed into the exhaust manifold or catalytic converter. It will have a wire harness connected to it.

3. The O2 sensor may be difficult to see, as it is often located in a tight spot. You may need to use a flashlight to find it.

Here is a diagram of the location of the O2 sensor in a 1996 Honda Accord LX:

[Image of the location of the O2 sensor in a 1996 Honda Accord LX]

Once you have found the O2 sensor, you can replace it if necessary. The replacement procedure is fairly simple and can be done in about 30 minutes.