* 10mm socket wrench
* 12mm socket wrench
* 14mm socket wrench
* Ratchet
* pry bar
* Hammer
Instructions
1. Open the tailgate and locate the four bolts that hold the bed to the frame. These bolts are located on the underside of the bed, near the corners.
2. Use the 14mm socket wrench to remove the four bolts.
3. Once the bolts are removed, use the pry bar to pry the bed up from the frame. The bed may be stuck on, so you may need to use some force.
4. Once the bed is lifted off the frame, use the hammer to knock out the four pins that hold the bed to the frame.
5. The bed is now free and can be removed.
To reinstall the bed, simply follow the instructions in reverse order.
Tips
* Make sure to put the pins back in the holes before you lower the bed back onto the frame.
* If you have a helper, it will make the job much easier.
* Be careful not to damage the bed or frame when you are prying it up.
