1. Disconnect the battery. This will prevent the horn from accidentally sounding while you are working.
2. Locate the horn button. It is located in the center of the steering wheel.
3. Pry the horn button off of the steering wheel. You can use a flathead screwdriver or a pry tool to do this.
4. Disconnect the horn wires. There are two wires that connect the horn button to the horn. Disconnect these wires by pulling them apart.
5. Remove the horn button assembly. The horn button assembly consists of the horn button, the horn contacts, and the horn spring. Remove the horn button assembly by pulling it out of the steering wheel.
6. Reinstall the horn button assembly. Insert the horn button assembly into the steering wheel. Connect the horn wires. Push the horn button back into place.
7. Reconnect the battery.