> - Tools Needed:
> - Phillips Head Screwdriver
> - Flat Head Screwdriver
> - Replacement Headlight Bulb (9006)
1. Open the hood of your Mazda.
> - Locate the hood release lever inside your vehicle, usually under the dashboard on the driver's side.
> - Pull the lever to release the hood and lift it up.
2. Locate the headlight assembly.
> - The headlight assembly is behind the plastic grill cover at the front of the truck.
> - There are two headlight assemblies, one on each side.
3. Remove the plastic grill cover.
> - Use a flat head screwdriver to gently pry the grill cover off of the headlight assembly.
> - Set the grill cover aside in a safe place.
4. Remove the old headlight bulb.
> - Locate the old headlight bulb inside the headlight assembly.
> - Turn the bulb counterclockwise to remove it from the socket.
> - Be careful not to drop the old bulb.
5. Insert the new headlight bulb.
> - Hold the new headlight bulb by the base and insert it into the socket.
> - Turn the bulb clockwise to secure it in place.
6. Replace the plastic grill cover.
> - Align the grill cover with the headlight assembly and press it into place.
> - Make sure the grill cover is securely fastened.
7. Test the new headlight bulb.
> - Turn the headlight switch on and check if the new bulb works.
8. Close the hood of your Mazda.
> - Lower the hood and release the hood release lever.
