1. Gather the necessary tools and materials.
- New windshield (OEM or aftermarket)
- Windshield sealant
- Primer
- Activator
- Adhesive tape
- Glass cleaner
- Razor blade
- Pry tool
- Suction cups
- Utility knife
- Flashlight
- Safety glasses
2. Prepare the vehicle.
- Remove the wiper blades and cowling.
- Tape off the surrounding areas to protect the paint.
- Clean the windshield frame thoroughly to remove any dirt or debris.
3. Remove the old windshield.
- Use the pry tool to carefully pry the windshield molding from the frame.
- Continue prying until the molding is completely removed.
- Once the molding is removed, use a utility knife to cut the old windshield sealant.
- Use the suction cups to carefully lift the old windshield out of the frame.
4. Clean the windshield frame.
- Use the glass cleaner and a razor blade to remove any remaining sealant from the frame.
- Clean the frame thoroughly to remove any dirt or debris.
5. Apply the primer.
- Apply a coat of primer to the windshield frame.
- Allow the primer to dry according to the manufacturer's instructions.
6. Apply the sealant.
- Apply a thick bead of sealant to the windshield frame.
- Make sure to apply the sealant evenly and completely around the frame.
7. Install the new windshield.
- Carefully place the new windshield into the frame.
- Make sure that the windshield is seated properly in the frame.
- Use the suction cups to hold the windshield in place while the sealant dries.
8. Apply the activator.
- Apply the activator to the sealant around the windshield frame.
- Allow the activator to dry according to the manufacturer's instructions.
9. Reinstall the wiper blades and cowling.
- Reinstall the wiper blades and cowling that were removed in step 2.
10. Clean up.
- Clean up any excess sealant or debris from the vehicle.
11. Allow the sealant to cure.
- Allow the sealant to cure completely before driving the vehicle.
- The curing time may vary depending on the sealant used.
Note: It is important to follow the instructions provided by the windshield sealant manufacturer carefully to ensure proper installation and a long-lasting seal.
