* Socket set
* Ratchet
* Phillips head screwdriver
* Flat head screwdriver
* Trim removal tool
Instructions
1. Remove the front bumper cover by following these steps:
- Open the hood and remove the six 10mm bolts that secure the top of the bumper cover to the radiator support.
- Remove the two 10mm bolts that secure the bottom of the bumper cover to the front fenders.
- Use a trim removal tool to pry up the clips that secure the bumper cover to the front fenders and body.
- Once all of the clips are released, carefully pull the bumper cover off of the car.
2. Remove the old fog lights by following these steps:
- Locate the two 10mm bolts that secure each fog light to the bumper cover.
- Remove the bolts and carefully pull the fog lights out of the bumper cover.
3. Disconnect the electrical connector from each fog light.
4. Install the new fog lights into the bumper cover by following these steps:
- Insert the fog lights into the openings in the bumper cover.
- Secure the fog lights with the two 10mm bolts.
- Connect the electrical connector to each fog light.
5. Install the front bumper cover by following these steps:
- Carefully position the bumper cover onto the car.
- Secure the bumper cover with the six 10mm bolts at the top and two 10mm bolts at the bottom.
- Use a trim removal tool to snap the clips that secure the bumper cover to the front fenders and body.
6. Close the hood and your installation is complete.
