Locate the programming button on your garage door opener near the motor unit inside the garage.
Ensure that your garage door is closed.
Press and hold the programming button until the indicator lights blinks/flashes. This usually takes a few seconds.
Return to your car and sit in the driver's seat with all doors closed.
Insert the key into the ignition. Turn the key to the "ON" position, but do not start the engine.
Press and hold the garage door remote button in your car for about 20 seconds.
Release the button.
Press and hold the garage door remote button again until the garage door opens and closes (approximately 4-5 seconds).
The garage door opener is now programmed to your vehicle's remote.
Test the functionality by pressing the remote button in your car and verifying if the garage door operates correctly.
Note: If the programming is successful, the indicator light on your garage door opener should remain lit continuously. If it starts blinking again or does not respond as expected, you may need to repeat the programming steps.
