-Lug wrench
-Jack and jack stands
-Breaker bar or ratchet and socket
-Phillips head screwdriver
-Hammer
Instructions:
Front brake rotors:
Step 1: Prepare the vehicle. Before removing the brake rotors, ensure that the vehicle is in park, the emergency brake is engaged, and the parking brake is securely set.
Step 2: Remove the lug nuts. Using the lug wrench, loosen the lug nuts (but don't remove them completely) on the front wheels.
Step 3: Raise the vehicle with a jack and secure with jack stands. Raise the front end of the vehicle using the jack and secure it in place with jack stands. Make sure the vehicle is sturdy and stable before continuing.
Step 4: Remove the lug nuts and wheels. Remove the lug nuts (remember to always rotate them in a star pattern) and set aside. Remove the front wheels.
Step 5: Locate the brake caliper bolts. The brake caliper is attached to the rotor by two bolts. Locate these bolts and prepare to remove them.
Step 6: Remove the brake caliper bolts. Using a ratchet or breaker bar, remove the brake caliper bolts. Be careful not to damage the bolts.
Step 7: Remove the brake caliper. Gently pry the brake caliper up and away from the rotor. Hang it securely out of the way using a piece of wire or a bungee cord. Avoid letting it hang by the brake line.
Step 8: Remove the rotor. Once the brake caliper is out of the way, you should be able to easily lift the rotor off. If it's stuck, use a hammer to gently knock it loose.
When reinstalling the brake rotors, make sure to clean the mating surfaces of the rotor and hub with a wire brush to remove any rust or debris. Apply a thin layer of anti-seize compound to the mating surfaces to prevent future rust and corrosion.
