- Phillips head screwdriver
- Flat head screwdriver
- New door handle
Instructions
1. Open the door and remove the two screws that hold the door handle in place.
2. Use a flat head screwdriver to pry off the cover that covers the door handle bolts.
3. Remove the three bolts that hold the door handle in place.
4. Remove the old door handle from the door.
5. Install the new door handle by inserting it into the hole in the door.
6. Replace the three bolts and tighten them securely.
7. Replace the cover that covers the door handle bolts.
8. Insert the two screws and tighten them to secure the door handle.
9. Open and close the door to test the door handle.
