2. Remove the two screws exposed by removing the plastic panels.
3. Next remove the two screws securing the door handle.
4. Carefully pry the window crank shaft with a flathead screwdriver.
5. Pry off the plastic control bezel to expose the window control switch screws and remove them.
6. Now locate the door panel retainer screws which are normally covered up by the door panel.
7. Using a Phillips screwdriver remove the retainer screws.
8. Using a pry tool start at the bottom corner of the door panel and pry it up while pulling.
9. When the door panel is popped free slide it up about 3 inches.
10. Remove the wire connectors, then remove the window switch bezel.
11. Once the wire connectors and bezel are removed you can remove the door panel.
