- Phillips-head screwdriver
- Flat-head screwdriver
- 10 mm socket
- Ratchet
- Extension
Instructions
1. Disconnect the negative battery cable.
2. Remove the glove compartment. There are four Phillips-head screws that hold it in place, two on the top and two on the bottom.
3. Locate the blower motor. It is located behind the glove compartment, on the passenger side of the vehicle.
4. Disconnect the electrical connector from the blower motor.
5. Remove the three 10 mm bolts that hold the blower motor in place.
6. Remove the old blower motor from the vehicle.
7. Install the new blower motor.
8. Reinsert the three 10 mm bolts that hold the blower motor in place.
9. Reconnect the electrical connector to the blower motor.
10. Reinstall the glove compartment.
11. Reconnect the negative battery cable.
