2. Locate the washer fluid reservoir. It is usually located in the engine bay, near the firewall.
3. Disconnect the electrical connector from the washer pump.
4. Use a wrench to loosen the hose clamp that secures the washer hose to the pump.
5. Pull the washer hose off the pump.
6. Use a wrench to loosen the mounting bolts that secure the pump to the reservoir.
7. Remove the pump from the reservoir.
8. Install the new washer pump.
9. Reattach the washer hose to the pump and secure it with the hose clamp.
10. Reconnect the electrical connector to the pump.
11. Test the washer pump by turning on the windshield wipers and spraying washer fluid.
