2. Remove the rotor.
3. Remove the trigger disc and camshaft position sensor from the distributor shaft.
4. Loosen the center bolt that holds the distributor body together.
5. Remove the distributor housing.
6. Lift out the distributor shaft and gear.
7. Remove the o-ring from the distributor shaft.
8. Remove the snap ring from the distributor shaft.
9. Loosen the two screws that hold the module cover in place.
10. Remove the module cover.
11. Remove the pick-up coil from the distributor shaft.
12. Remove the points and condenser from the distributor shaft.
13. Remove the cap from the distributor shaft.
14. Remove the rotor button from the distributor shaft.
