1. Pry off the plastic cover. There are two plastic covers that need to be pried off. One is located near the door handle, and the other is located at the bottom of the door. Use a flat-head screwdriver or pry tool to pry the covers off.
2. Remove the screws. Once the plastic covers are removed, you will see two screws holding the door panel in place. Remove these screws using a Phillips-head screwdriver.
3. Disconnect the electrical connectors. There are two electrical connectors that need to be disconnected before you can remove the door panel. One is located near the door handle, and the other is located at the bottom of the door. Pry them off with a flat-head screwdriver.
4. Lift the door panel off. Once the screws are removed, and the electrical connectors are disconnected, you can lift the door panel off. Be careful not to damage the door panel when removing it.
5. Replace the door panel. To replace the door panel, simply reverse the steps above.
