- Floor jack
- Jack stands
- Wheel chocks
- Lug wrench
- Combination wrench set
- Toe adjustment tool
1. Engage the parking brake.
2. Loosen the lug nuts on the front wheels, but do not remove them.
3. Place the floor jack under the front crossmember and raise the vehicle until the wheels are off the ground.
4. Place the jack stands under the vehicle and lower it until it is resting on them.
5. Remove the lug nuts and wheels.
6. Use the combination wrench to loosen the lock nuts on the toe adjustment bolts.
7. Use the toe adjustment tool to turn the bolts until the wheels are aligned to the desired toe setting.
8. Reinstall the wheels and lug nuts, and tighten the lug nuts to 100 ft-lbs.
9. Lower the vehicle and remove the jack stands.
