Tools:
- Philips head screwdriver
- Flat head screwdriver
- A pair of pliers
Instructions:
1. Open the trunk of your RX 300.
2. Locate the two black plastic covers on the inside of the trunk lid, near the top of the window.
3. Use the flat head screwdriver to pry open the covers.
4. Remove the two screws beneath the covers using the Phillips head screwdriver.
5. Gently pry the spoiler up from the trunk lid, starting from one side and working your way to the other. Be careful not to damage the paint on your trunk lid.
6. Once the spoiler is removed, disconnect the wire for the third brake light.
7. Remove the adhesive foam tape from the trunk lid.
8. Clean the area where the spoiler was mounted.
9. Reattach the black plastic covers.
