1. Programming Mode
* Insert the key into the ignition and turn the key to the “ON” position (do not start the engine).
* Open and close the driver's door six times within 10 seconds.
* The door ajar light on the dashboard will blink or the horn will chirp to indicate the vehicle has entered programming mode.
2. Set the Remote
* Immediately press the lock button on the remote that you wish to program (up to 4 remotes can be programmed).
* The door ajar light will blink or the horn will chirp one time to confirm that the remote has been programmed.
* Repeat this step to program additional remotes.
3. Exit Programming Mode
* Turn the key to the “OFF” position.
