1. Front Brake:
- Stand over your bike with your feet flat on the ground.
- Squeeze the front brake lever firmly.
- The brake should engage smoothly and should stop the bike from rolling forward.
- Make sure the brake does not lock up the wheel, which could cause you to lose control of the bike.
2. Rear Brake:
- Sit on your bike and place your feet on the pedals.
- Apply pressure to the rear brake pedal.
- The brake should engage smoothly and should stop the bike from rolling backward.
- Again, ensure that the brake does not lock up the wheel.
3. Check Brake Pads:
- Inspect the brake pads for wear and tear. If the pads are worn down or damaged, they should be replaced.
- Make sure that the brake pads are properly aligned with the brake rotors or rims (depending on your bike type).
4. Check Brake Fluid (if applicable):
- If your bike has hydraulic brakes, check the brake fluid level.
- If the fluid level is low, add the recommended brake fluid as specified by the bike manufacturer.
5. Test Braking in Different Conditions:
- Test the brakes in different conditions, such as on dry pavement, wet pavement, and loose gravel.
- Make sure that the brakes perform consistently and effectively in all conditions.
Remember, it is important to regularly inspect and maintain your bike brakes to ensure they are functioning properly and safely. If you have any concerns about your bike brakes, it is best to consult with a professional bike mechanic for further assistance.
