1. Disconnect the battery.
2. Remove the air cleaner assembly.
3. Disconnect the throttle linkage.
4. Disconnect the fuel line.
5. Disconnect the vacuum lines.
6. Remove the bolts that hold the throttle body to the intake manifold.
7. Remove the throttle body from the intake manifold.
Step 2: Install the carburetor
1. Place the carburetor on the intake manifold.
2. Install the bolts that hold the carburetor to the intake manifold.
3. Tighten the bolts until they are snug.
4. Reconnect the fuel line.
5. Reconnect the vacuum lines.
6. Reconnect the throttle linkage.
7. Install the air cleaner assembly.
8. Reconnect the battery.
