Note: Before beginning, make sure that the ignition is turned off and that the car is in park.
Tools Needed:
- Phillips-head screwdriver
- Replacement tail light bulbs (Check your owner’s manual for the correct bulb type)
Step-by-Step Guide:
1. Open the Trunk: Open the trunk of your BMW 325i.
2. Locate the Tail Light Assembly: Inside the trunk, you should see the tail light assembly on both sides. Each tail light assembly consists of multiple compartments for different bulbs, including the tail light, brake light, and turn signal bulbs.
3. Remove the Tail Light Assembly: Use a Phillips-head screwdriver to remove the screws that secure the tail light assembly to the car’s body. Once the screws are removed, carefully pull the tail light assembly out.
4. Locate the Tail Light Bulb: Inside the tail light assembly, you will see different bulbs. Find the faulty or burned-out tail light bulb that you need to replace.
5. Remove the Old Bulb: Gently twist and pull the old bulb counterclockwise to remove it from the socket. Be careful not to drop it.
6. Insert the New Bulb: Take the replacement bulb and insert it into the socket. Make sure to twist the bulb clockwise until it is secure.
7. Reinstall the Tail Light Assembly: Carefully put the tail light assembly back into place and secure it with the screws that you removed earlier.
8. Repeat for the Other Side: If needed, repeat steps 3 to 7 to replace the tail light bulb on the other side of your BMW 325i.
9. Test the Lights: Turn on the ignition and check if the tail lights are functioning properly.
Note: If the new bulbs do not light up, ensure that they are properly inserted and that there are no loose connections. If the problem persists, it is recommended to take your car to a qualified mechanic for further diagnosis.
