1. Park your vehicle in a safe location and turn off the engine. Engage the parking brake.
2. Open the hood of your vehicle.
3. Locate the running light bulb. It is usually located in the front of the vehicle, near the headlight.
4. Gently press the release tab on the running light bulb socket and turn the bulb counterclockwise to remove it.
5. Insert the new running light bulb into the socket and turn it clockwise until it is secure.
6. Close the hood of your vehicle.
7. Test the running light to make sure it is working properly.
Here are some additional tips for replacing a running light bulb:
* Make sure you have the correct replacement bulb before you start. You can find the bulb size printed on the old bulb or in your vehicle's owner's manual.
* Be careful not to drop the new bulb. If the bulb breaks, it could shatter and cause injuries.
* If you have difficulty removing or installing the bulb, you may need to use a pair of needle-nose pliers or a flashlight to help you.
* Always replace both running light bulbs at the same time, even if only one is burned out. This will help ensure that both bulbs are the same color and brightness.
