1. Remove the old vinyl window.
Before you can install the new vinyl window, you'll need to remove the old one. This can be done by carefully cutting around the edges of the old window with a sharp utility knife. Be careful not to damage the fabric of the convertible top.
2. Clean the area around the old vinyl window.
Once the old vinyl window is removed, you'll need to clean the area around it to remove any dirt, grime, or adhesive residue. This can be done with a mild detergent and water.
3. Install the new vinyl window.
To install the new vinyl window, you'll need to first apply a thin bead of adhesive around the edges of the opening in the convertible top. Then, carefully place the new vinyl window into the opening, and smooth it out with a squeegee. Make sure that the vinyl is properly adhered to the fabric of the convertible top.
4. Allow the adhesive to dry completely.
Before you can put your convertible top back on your car, you'll need to allow the adhesive to dry completely. This may take several hours.
5. Reinstall the convertible top.
Once the adhesive is dry, you can reinstall the convertible top on your car.
By following these steps, you can easily replace the back vinyl window of your convertible top for a fraction of the cost of having it done professionally.
