* A socket wrench set
* A ratchet
* A pry bar
* A hammer
1. Park your Dodge Ram on a level surface and turn off the engine.
2. Open the hood of your Dodge Ram and disconnect the negative battery terminal.
3. Remove the bolts that hold the bumper brace in place. There will be two bolts on each side of the bumper brace.
4. Use a pry bar to pry the bumper brace loose from the frame of the vehicle.
5. Remove the bumper brace from the vehicle.
To reinstall the bumper brace, simply follow the steps in reverse order.
Here are some additional tips for removing a Dodge Ram bumper brace:
* Be careful not to damage the paint on your vehicle when you are removing the bumper brace.
* If the bolts are rusted or corroded, you may need to use a penetrating oil to loosen them up.
* If you are having difficulty removing the bumper brace, you may need to take your vehicle to a mechanic for assistance.
