Here are the steps to identify the wire connections on a Honda 72cc engine:
1. Ignition Coil Connections:
- Connect the black/white wire from the ignition coil to the "coil" terminal on the magneto.
- Connect the black/red wire from the ignition coil to the "ground" terminal on the magneto.
- Connect the blue/white wire from the ignition coil to the "on/off" terminal on the magneto.
2. Spark Plug Connection:
- Connect the black/yellow wire from the magneto to the spark plug.
3. Throttle Sensor Connections:
- Connect the green wire from the throttle sensor to the "throttle" terminal on the magneto.
- Connect the black/green wire from the throttle sensor to the "ground" terminal on the magneto.
4. Choke Switch Connection:
- Connect the black/white wire from the choke switch to the "choke" terminal on the magneto.
- Connect the black wire from the choke switch to the "ground" terminal on the magneto.
5. Kill Switch Connection:
- Connect the red/black wire from the kill switch to the "kill" terminal on the magneto.
- Connect the black wire from the kill switch to the "ground" terminal on the magneto.
6. Ground Connections:
- Ensure all the black or black/yellow wires are connected to the "ground" terminals to complete the electrical circuit.
Note: The wire color codes may slightly differ in some Honda 72cc models, so it's always a good practice to refer to the specific engine's wiring diagram for accurate connections.
