Materials Needed:
1. New wiper blade inserts (make sure they are the correct size for your vehicle).
2. Cleaning cloth or paper towel.
3. Small flat-head screwdriver or trim removal tool.
Procedure:
1. Locate the wiper blade arm: Lift the wiper blade arm away from the windshield so you can access the attachment point.
2. Release the old wiper blade:
- For conventional wiper blades: Press the release tab or button on the wiper blade arm and lift the blade upwards to release it.
- For beam-style wiper blades: Use the small flat-head screwdriver or trim removal tool to pry open the locking mechanism and lift the blade off the arm.
3. Remove the old wiper blade insert:
- Slide the old wiper blade insert out of the wiper blade housing.
4. Clean the wiper blade arm (optional):
- Use the cleaning cloth to remove any dirt or debris on the wiper blade arm and the windshield.
5. Install the new wiper blade insert:
- Slide the new wiper blade insert into the wiper blade housing until it clicks into place.
6. Reinstall the wiper blade arm:
- For conventional wiper blades: Hook the wiper blade arm back onto its original attachment point.
- For beam-style wiper blades: Press down on the locking mechanism until it clicks, securing the wiper blade firmly onto the arm.
7. Test the new wiper blades:
- Turn the windshield wipers on to make sure the new blades are working properly, clearing the windshield effectively.
Repeat the steps for the other wiper blade if necessary.
Remember to refer to your vehicle's owner's manual for specific instructions or guidance related to your Pontiac G6 model and any additional details. Proper maintenance and replacement of your wiper blades will ensure clear visibility and safety while driving in wet conditions.
