1. Gather the tools you need. You will need a lug wrench, a jack, a jack stand, a C-clamp, and a new set of brake rotors.
2. Park your vehicle in a safe location on a level surface.
3. Turn off the engine and apply the parking brake.
4. Loosen the lug nuts on the front wheels.
5. Jack up the vehicle and place a jack stand under the frame.
6. Remove the lug nuts and wheels.
7. Use a C-clamp to compress the brake caliper piston back into the caliper.
8. Remove the two bolts holding the brake caliper in place.
9. Remove the old brake rotor from the hub.
10. Install the new brake rotor onto the hub.
11. Reinstall the brake caliper and bolts.
12. Reinstall the wheels and lug nuts.
13. Lower the vehicle and remove the jack stand.
14. Repeat steps 7-12 on the other side of the vehicle.
15. Test the brakes by pumping the brake pedal several times before driving.
That's it! You have now successfully replaced the front brake rotors on your Ford ZX2.
