1. Turn the ignition key to the "On" position, but do not start the engine.
2. Wait for the "Check Engine" light to come on.
3. Quickly turn the ignition key to the "Off" position five times.
4. Wait for the "Check Engine" light to start flashing.
5. Count the number of times the light flashes, then pause for two seconds.
6. Repeat steps 4 and 5 until you have entered all of the error codes.
7. After you have entered the last error code, the "Check Engine" light will come on solid.
8. Turn the ignition key to the "Start" position to start the engine.
9. The error codes have now been reset.
