- A flat-head screwdriver
- A pair of pliers
- A hammer
- A new retaining ring
Here are the steps on how to remove the retaining ring:
1. Park your lawn mower on a flat surface and engage the parking brake.
2. Locate the retaining ring. It is usually located on the inside of the wheel, near the center.
3. Use the flat-head screwdriver to pry up one edge of the retaining ring.
4. Once the edge of the retaining ring is up, use the pliers to grab it and pull it out of the wheel.
5. If the retaining ring is difficult to remove, you can use the hammer to tap it out gently.
6. Once the retaining ring is removed, you can remove the tire.
7. To install a new retaining ring, simply insert it into the wheel and press it down until it snaps into place.
Here are some additional tips for removing a retaining ring on a craftsman lawn mower tire:
- If the retaining ring is rusty or corroded, you may need to use a penetrating oil to loosen it up.
- Be careful not to damage the wheel when you are removing the retaining ring.
- If you are still having trouble removing the retaining ring, you can take your lawn mower to a repair shop.
