* Socket set (10 mm, 13 mm)
* Torx T30 bit
* Phillips head screwdriver
Instructions
1. Open the driver's door.
2. Remove the three 10 mm bolts that hold the door check strap to the door.
3. Remove the two 13 mm bolts that hold the door check strap to the door frame.
4. Disconnect the wiring harness from the door.
5. Unscrew the phillips head screws that secure the door handle.
6. Pull the door handle out.
7. Unbolt the 2 Torx-30 bolts that hold the window mechanism in place.
8. Remove the two 13 mm bolts that hold the door hinge to the door frame.
9. Remove the door from the vehicle.
