With Key In Ignition (Method 1)
1. Turn the key to the “On” position without starting the engine.
2. Press and release the gas pedal three times within five seconds.
3. Turn the key to the “Off” position.
4. Remove the key from the ignition.
Without Key In Ignition (Method 2)
1. Open the driver's door and press and hold the "Trip" button on the dashboard.
2. Turn the ignition switch to the "On" position.
3. Release the "Trip" button.
4. Press and hold the "Trip" button again for about 3 seconds.
5. Release the "Trip" button. The service light should be reset.
Note: If the above methods don't work, you may need to use a diagnostic tool or have the oil indicator reset by a qualified mechanic.
