- A flat-head screwdriver
- A Philips-head screwdriver
- A socket wrench set
- A new door lock assembly
Here are the steps involved in changing the door lock:
1. Open the driver's door and remove the door panel by prying it off with the flat-head screwdriver.
2. Locate the door lock assembly, which is mounted on the back of the door.
3. Disconnect the electrical connector from the door lock assembly.
4. Remove the four bolts that hold the door lock assembly in place with the socket wrench set.
5. Remove the old door lock assembly from the door.
6. Test the new door lock assembly to make sure it works properly.
7. Install the new door lock assembly in the door and secure it with the four bolts.
8. Reconnect the electrical connector to the door lock assembly.
9. Replace the door panel by snapping it back into place.
10. Test the door lock assembly again to make sure it works properly.
Changing the driver door lock on an R reg Seat Ibiza is a relatively simple task that can be completed in about 30 minutes.
