__NOTE:__
• The vehicle must be in ignition or key ON position but without the engine running.
• The ignition key should be in the position 1 (only the green instrument lights are on).
1. Press and hold the "0.0/SET" button on the instrument cluster.
2. While holding down the "0.0/SET" button, turn the ignition key to position 2 (all the instrument lights are on).
3. Continue to hold the "0.0/SET" button for at least 5 seconds.
4. The display will show "Service INSP" and then "Service OIL" alternately.
5. Release the "0.0/SET" button.
6. Press and hold the "0.0/SET" button again for at least 5 seconds.
7. The display will show "Service reset" for a few seconds.
8. The service now display should now be reset.
NOTE: If the service reset is unsuccessful, the display will show "Service --". In this case, repeat the steps above.
