Gather Materials: You'll need the remote control, the spare key, and the vehicle.
Preparation: Make sure the vehicle is unlocked, and the spare key ready.
Enter Programming Mode: To initiate programming mode, perform these steps:
Open the driver's door and get in.
Insert the spare key into the ignition and turn it to the ON position (one click before starting the engine).
Release the key, then immediately press and hold the unlock button on the remote control until the indicators flash twice (about 1 second).
Programming the Remote: While holding the unlock button on the remote, perform the following steps:
Press the spare key's unlock button twice, releasing between presses.
Release the unlock button on the remote.
If successful, the indicators will flash twice.
Finalize Programming: To complete the process:
Remove the key from the ignition.
Open and close the driver's door.
Testing: To ensure successful reprogramming, press and hold the unlock button on the reprogrammed remote. If the vehicle unlocks and the indicators flash twice, the reprogramming was successful.
Note: If the indicators don't flash or the programming fails, try repeating the process again, ensuring you follow the timing precisely. If the programming still doesn't work, consult the owner's manual or seek assistance from a professional locksmith or automotive technician.
