A flat-head screwdriver
A Phillips-head screwdriver
A torx wrench set
A new boot lock
1. Open the boot of your Seat Leon.
2. Locate the two screws that hold the boot lock in place. They are located on either side of the lock, near the top.
3. Use the flat-head screwdriver to remove the two screws.
4. Once the screws are removed, you can use the Phillips-head screwdriver to remove the lock from the boot.
5. Disconnect the electrical connector from the back of the lock.
6. Fit the new boot lock to the boot.
7. Secure the lock with the two screws.
8. Reconnect the electrical connector.
9. Test the lock to make sure it is working properly.
