Park your car on level ground and turn off the engine.
Open the hood and remove the two 10mm bolts holding the lower edge of the front bumper to the body.
Remove the upper edge of the front bumper by pulling it straight out.
Remove the four 10mm bolts holding the side of the front bumper to the body.
Push the front bumper straight down and remove it from the car.
Tools Needed:
Flat-head screwdriver
Phillips-head screwdriver
Socket set
13 mm wrench
15 mm wrench
Instructions:
1. Open the hood of the Porsche 944.
2. Locate the four 10 mm bolts that hold the front bumper to the car. There are two bolts on each side of the bumper, located near the headlights.
3. Remove the four 10 mm bolts using the 13 mm wrench.
4. Grasp the front bumper and pull it straight forward to remove it from the car.
5. Be careful not to drop the front bumper. It is a heavy piece and could cause damage if it falls.
