Auto >> AutoSPT >  >> Electric car

Where is fuse that controls turn signals and flasher for 1996 Lincoln town car?

The fuse for the turn signals and flasher in a 1996 Lincoln Town Car isn't a single fuse. The system is more complex and involves several components, including the flasher itself, which can fail independently. There isn't one fuse that controls *both* the turn signals and the flasher unit.

To troubleshoot, you need to check several fuses:

1. Consult your owner's manual: This is the most important step. The manual will have a fuse box diagram showing the locations and what each fuse protects. Look for fuses related to "turn signals," "hazard lights," or potentially "body control module" (BCM) as the BCM often plays a role in controlling these functions.

2. Check the fuses in the underhood fuse box: This box is usually located under the hood, often near the battery.

3. Check the fuses in the interior fuse box: This is typically located inside the car, often under the dashboard or in the center console. Again, consult your owner's manual for its location.

4. Consider the Flasher Unit: If the fuses are good, the problem might be the flasher relay itself. This is a small component, often located near the fuse boxes, and is responsible for the intermittent clicking sound of the turn signals. It can fail even if the fuses are fine. A faulty flasher can cause the turn signals to not work at all, flash rapidly, or not flash at all.

In short: Don't assume one single fuse controls everything. Check all relevant fuses as indicated in your owner's manual and then consider the flasher relay as a potential cause. If you're unsure about working on your car's electrical system, it's best to take it to a qualified mechanic.