1. Locate the fuse box. It is located under the hood, on the driver's side of the vehicle.
2. Open the fuse box. There is a small latch on the side of the fuse box that you can pull to open it.
3. Locate the fuse for the washer motor. The fuse for the washer motor is labeled "WASHER". It is a 10 amp fuse.
4. Remove the old fuse. Use a fuse puller to remove the old fuse from the fuse box.
5. Insert the new fuse. Place the new 10 amp fuse into the slot for the washer motor fuse.
6. Close the fuse box. Push down on the fuse box cover until it clicks shut.
The washer motor should now be working again.
