Auto >> AutoSPT >  >> Electric car

Where do you attach jumper cables on a 1996 Pontiac Transport?

Positive Terminal

1. Open the hood.

2. Locate the positive terminal on your transported. It will be clearly indicated with a "+" sign.

3. Connect the red (positive) jumper cable to the positive terminal on your transported.

Negative Terminal

1. Then attached the other end of the red (positive) jumper cable to the positive terminal on the working battery.

2. Then attached the black (negative) jumper cable to the black terminal on the working battery.

3. Then attached the other end of the black (negative) jumper cable to a metal surface on your Pontiac, far away from the battery and fuel lines. This is called the ground connection.

4. Start the working car and let it run for a few minutes.

5. Then, try starting your Pontiac Transport. If it starts, let both vehicles run for a few more minutes.

6. Disconnect the jumper cables in the reverse order you attached them.

Auto Repair
How do you change a Ford Taurus Sable windshield washer pump? How do you replace wheel stub ford expedition?
Car Care
What services are provided by the company Insurance Factory? What to Do When Your Car Is Stranded In the Snow How To Use Car Battery Charger Effectively?
Engine
Why is catalyst used in modern car engines? Can a f250 diesel pull d4 bulldozer?
Electric Car
How do you known if your car can handle e-85 gas? Where is the fuel pump located on a 1995 Chevy s10 pick up? Why do a 93 Chevy caprice brake lights work when you hit the brakes?
Autopilot
How can i get it repare or replace .Throttle actuator control throttle body range for Dodge Caliber? How do you shift gears on a 50cc dirt bike?
Car Photos
Where is the VIN located on a classic car? Where is the fuel filter located on a 1990 Cadillac Fleetwod? What are the Dimensions of a 82 dodge truck short bed?