1. Locate the brake fluid reservoir. It is usually a translucent plastic container with a black cap, and it is located in the engine compartment near the master cylinder.
2. Remove the cap from the brake fluid reservoir. Be careful not to spill any brake fluid.
3. Check the level of the brake fluid. It should be between the "MIN" and "MAX" marks on the reservoir.
4. If the brake fluid level is low, add DOT 3 brake fluid to the reservoir until it reaches the "MAX" mark.
5. Replace the cap on the brake fluid reservoir.
It's important to remember to check your brake fluid level regularly and to keep it at the proper level. Brake fluid is hygroscopic, which means that it absorbs water from the air, and water in the brake fluid can reduce its effectiveness. It's also important to use DOT 3 brake fluid, as other types of brake fluid can damage the brake system.
