- Blue LED bulbs (enough to replace all of your dashboard lights)
- Soldering iron
- Solder
- Wire strippers
- Phillips head screwdriver
- Flat head screwdriver
Step 2: Remove Dashboard
1. Locate the dashboard in your 05 Peugeot 206cc.
2. Use a Phillips head screwdriver to remove the screws holding the dashboard in place.
3. Gently pry the dashboard off the dashboard frame using a flat head screwdriver.
4. Set the dashboard aside in a safe place.
Step 3: Remove Old Bulbs
1. Locate the orange bulbs in the dashboard.
2. Use a soldering iron to desolder the old bulbs from the circuit board.
3. Be careful not to damage the circuit board.
Step 4: Install New Bulbs
1. Take one of the blue LED bulbs and insert it into the socket where the old bulb was.
2. Use a soldering iron to solder the new bulb in place.
3. Repeat this process for all of the bulbs in the dashboard.
Step 5: Test the Lights
1. Turn on the dash power and ignition
2. Check that all the lights are working correctly.
Step 6: Re-Assemble Dashboard
1. Reattach the dashboard to the dashboard frame using the Phillips head screwdriver.
2. Start your car and enjoy the new blue dashboard lights!
