1. Open the glove box.
2. On the right side of the glove box, you will see a plastic panel held in place by two plastic clips.
3. Use a flat-head screwdriver to pry open the two clips and remove the plastic panel.
4. Behind the plastic panel, you will see the PCM. It is a black box with several electrical connectors plugged into it.
To remove the PCM, follow these steps:
1. Disconnect the electrical connectors from the PCM.
2. Remove the two bolts that hold the PCM in place.
3. Carefully lift the PCM out of its housing.
Be careful when handling the PCM, as it is a sensitive electronic component. Avoid touching the electrical connectors or the circuit board inside the PCM.
If you are replacing the PCM, be sure to install the new PCM in the same orientation as the old PCM. Also, be sure to reconnect the electrical connectors in the correct order.
If you have any questions or concerns about replacing the PCM, it is best to consult with a qualified mechanic.
