1. Gather necessary tools and parts:
- Replacement front side light bulb that fits your Hyundai model.
- Phillips head screwdriver or appropriate tool to remove screws or covers (if necessary).
2. Park the vehicle safely:
- Park your Hyundai on a level surface and turn off the engine.
- Engage the parking brake and ensure that the vehicle is stable.
3. Locate the side light assembly:
- The front side light assembly is typically located on the side of the vehicle, near the front wheel well or headlight area.
4. Remove the light cover or housing:
- Gently pry open the light cover or housing using a screwdriver (if necessary).
- Refer to your vehicle's owner's manual for specific instructions on how to access the side light.
5. Remove the old light bulb:
- Once you have accessed the side light assembly, you can remove the old light bulb by turning it counterclockwise or by gently pulling it out (depending on the bulb type).
6. Install the new light bulb:
- Insert the new light bulb into the socket and gently turn it clockwise until it is secure.
- Make sure that the new light bulb is properly seated in the socket.
7. Reattach the light cover or housing:
- Replace the light cover or housing that you removed earlier.
- Gently press or snap it back into place to ensure a secure fit.
8. Test the light:
- Turn on the headlights or parking lights to check if the new side light is working properly.
9. Clean up:
- Dispose of the old light bulb and any packaging materials appropriately.
Remember, these steps are general guidelines, and the specific procedure may vary depending on the exact make and model of your Hyundai vehicle. If you are unsure or uncomfortable with doing the replacement yourself, it's always a good idea to consult your vehicle's owner's manual or seek assistance from a professional.
