How can you route the serpentine belt to bypass AC compressor on a 1993 Buick lesabre What size do use?

To bypass the AC compressor on a 1993 Buick LeSabre, you will need to remove the serpentine belt and re-route it around the AC compressor. Here are the steps on how to do this:

1. Locate the serpentine belt. It is a long, thin belt that runs around the front of the engine.

2. Loosen the tensioner pulley. This is a pulley that is located near the top of the engine. There is a bolt in the center of the pulley. Loosen this bolt until the belt loosens.

3. Remove the belt. Once the belt is loose, you can remove it by pulling it off of the pulleys.

4. Re-route the belt. Wrap the belt around the crankshaft pulley, water pump pulley, alternator pulley, and power steering pump pulley. Avoid the AC compressor pulley.

5. Tighten the tensioner pulley. Once the belt is re-routed, tighten the tensioner pulley bolt until the belt is snug.

You can use serpentine belt size 6PK1760 for your 1993 Buick Lesabre.