- A Philips head screwdriver
- A flat head screwdriver
- A replacement bulb (this can be found at any auto parts store)
Center light
1. Begin by removing the two Philips head screws that hold the center light in place.
2. Once the screws are removed, carefully pry the light assembly out using a flat head screwdriver.
3. Replace the old bulb with a new one and snap the light assembly back into place.
4. Replace the two screws.
Air conditioning control
1. Remove the two Philips head screws that hold the air conditioning control panel in place.
2. Once the screws are removed, gently pry the control panel out using a flat head screwdriver.
3. Locate the burned-out bulb and replace it with a new one.
4. Snap the control panel back into place and replace the two screws.
Gear shift
1. Remove the two screws that hold the gear shift knob in place.
2. Once the screws are removed, pull the knob straight up to remove it.
3. Locate the burned-out bulb and replace it with a new one.
4. Snap the gear shift knob back into place and replace the two screws.
