- Replacement air conditioning belt
- Wrench set
- Pliers
- Safety glasses
Procedure:
1. Park the vehicle on a level surface and apply the parking brake.
2. Turn off the engine and allow it to cool down completely.
3. Open the hood of the vehicle.
4. Locate the air conditioning belt. It is usually located on the front of the engine, near the top.
5. Loosen the tensioner pulley bolt using a wrench.
6. Use a pair of pliers to remove the old air conditioning belt.
7. Install the new air conditioning belt by routing it around the pulleys.
8. Retighten the tensioner pulley bolt until the belt is snug.
9. Start the engine and let it run for a few minutes.
10. Check the belt for proper tension. It should not be too tight or too loose.
11. Turn off the engine and close the hood of the vehicle.
Tips:
- If you are not comfortable performing this task, you can take your vehicle to a qualified mechanic.
- Be sure to wear safety glasses when working on your vehicle.
- Always follow the safety instructions in your vehicle's owner's manual.
