Chrysler recommends using their own MOPAR ATF+4 automatic transmission fluid for the power steering system of the 2006 Chrysler Pacifica. ATF+4 is a synthetic automatic transmission fluid that is specifically designed for use in Chrysler, Dodge, Jeep, and Ram vehicles with automatic transmissions. It can also be used in other vehicles with automatic transmissions, but it is not recommended for use in manual transmissions or other applications.
Other acceptable fluids
The following are other acceptable power steering fluids for the 2006 Chrysler Pacifica:
- Mopar MS-9602 Power Steering Fluid
- Mobil 1 Synthetic ATF
- Castrol Transmax ATF
- Valvoline MaxLife ATF
- Royal Purple Max ATF
It is important to use the correct power steering fluid for your vehicle. Using the wrong fluid can damage your power steering system.
Here are the steps on how to change the power steering fluid in a 2006 Chrysler Pacifica:
1. Park the vehicle on a level surface.
2. Turn off the engine and allow it to cool down.
3. Open the hood of the vehicle.
4. Locate the power steering fluid reservoir. It is usually located on the passenger side of the engine compartment.
5. Remove the cap from the reservoir.
6. Use a turkey baster to remove the old fluid from the reservoir.
7. Dispose of the old fluid properly.
8. Refill the reservoir with new fluid.
9. Replace the cap on the reservoir.
10. Start the engine and let it run for a few minutes.
11. Turn the steering wheel from left to right several times.
12. Check the power steering fluid level and add more fluid if necessary.
