Auto >> AutoSPT >  >> Electric car

How do you remove injectors on peugeot 306 hdi?

To Remove the injectors, follow the steps below:

1. Disconnect the battery

2. Remove the engine cover

3. Locate the injectors (they are located on the top of the engine, near the back)

4. Disconnect the electrical connectors from the injectors

5. Remove the fuel lines from the injectors

6. Use a 17mm wrench to loosen the injector bolts

7. Remove the injectors from the engine

8. Be careful not to drop anything into the engine

Before reinstalling the injectors, you must clean them thoroughly. You can do this by using a soft cloth and some injector cleaner.

- Ensure all fuel pipe seals and copper washers have been replaced prior to reinstallation of the injectors.

- Do not over-tighten the injector pipes into the injectors (this can cause the injector to leak)

- Tighten the injector bolts to 27 Nm

Auto Repair
7 Fluids That Are Essential for Your Car How do you remove brake rotor on 2004 Chrysler pacifica?
Car Care
What Kind of Damage Can Hitting a Curb Cause? Which car rental companies offer automatic cars in Europe? Rotate Tires & Change Fluids
Engine
Where is the power window fuse on a 2002 leganza? What are the components of a hybrid vehicle engine that make it
Electric Car
Where is the transfer case vacuum switch on a 1999 Dodge Ram? How do you break into 2003 gmc pickup truck? What kind of oil goes into a 2002 dodge neon?
Autopilot
Where is turn signal flasher on 99 Honda Odyssey? Harley 2004 flhtcui starter relay location?
Car Photos
Where can you get the check engine light scanned on a 1995 Buick Lesabre? Where is the windshield wiper fuse for a 1984 Rabbit? What were car prices like in 1928?